New windows and doors improve comfort, cut energy bills and add long-term value to your home. Westlight Windows Austin pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
1. Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
2. Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
3. Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
ECO Window Systems Door Installation: The Austin Owner’s Guide
ECO Window Systems door installation in Austin typically runs $650 – $1,950 installed, depending on door size, slab versus pre-hung, and whether existing framing needs correction. We stock ECO-compatible thresholds, weatherstripping, hinge kits, and multipoint lock components on our trucks, so most door drops and re-hangs are done in a single visit. What usually brings a homeowner to this page is a door that suddenly drags across the threshold, a lock that no longer lines up with the strike plate, or a door that lets in more Hill Country dust than it used to.
We’re an independent Kingswell location in Austin, not a factory arm of ECO Window Systems, which means we match the part to the opening without a brand bias. Owen Satterfield, who runs Westlight Windows Austin, learned the door and window trade through the building construction program at Los Angeles Trade-Technical College before putting his tools down in Texas. Measure it right the first time and the rest of the job takes care of itself.
Which ECO Window Systems Models This Applies To
Most ECO Window Systems entry doors installed in Austin over the last decade fall into two groups: the hinged swing door lines with adjustable aluminum thresholds, and the sliding patio door lines using ECO’s narrow-stile frame profiles. The compatibility gotcha is the threshold height. ECO’s swing doors changed from a 1-1/4 inch adjustable threshold to a slimmer 7/8 inch profile around 2017, and the two are not interchangeable without planing the door bottom or shimming the sill. If your door slab has a sticker inside the hinge edge, look for the serial prefix “ES-D” followed by four digits. That tells you the series without pulling the door.
OEM ECO parts are the right call for thresholds and multipoint lock bodies, because the screw hole pattern and latch throw are specific. For hinges, rollers, and weatherstripping, quality aftermarket equivalents made to the same dimensions work well and typically cost 30 to 40 percent less. We give you the choice either way, with the pricing on paper before any work starts.
Signs Your ECO Window Systems Door Installation Is Failing
- The door drags or catches near the latch side. This usually means the adjustable threshold has settled or the hinges have worn enough to let the slab drop. In Austin’s clay-heavy soil, slab movement shifts the rough opening slightly, and a door that was square in March can be binding by August.
- You can see daylight under or around the door. Compression weatherstripping on ECO doors loses its memory after five or six Texas summers, especially on west-facing exposures. Once the seal flattens, air and dust move through the gap.
- The multipoint lock binds or won’t throw all three bolts. ECO lock bodies are dependable, but when the door drifts out of alignment, the top and bottom shoot bolts grind against the keepers. Forcing the lever only strips the internal gearbox.
- Condensation forms between the glass panes. That’s a failed insulating glass unit inside the door slab. The door panel still works, but the seal is gone and the glass will haze over time.
- The door rattles in wind but locks fine. Loose strike plates and worn hinge bushings let the slab move a millimeter or two. It sounds minor until the play transfers stress to the lock body every time the wind gusts.
Replacement Cost & What’s Included
For an ECO swing door in Austin, expect to pay between $650 and $1,450 installed for a slab swap with new hinges, threshold, and weatherstripping. If the rough opening needs reframing or the brickmold and exterior trim must be replaced, the job lands closer to $1,950. Sliding patio door panel replacements run $550 – $1,100 depending on glass package and hardware condition.
Every ECO door installation we price in Austin includes the door panel, hinges or rollers, threshold, weatherstripping, alignment, and haul-off of the old unit. The written quote you get before work starts is the price you pay, no door-step revisions. Our workmanship warranty on door installs matches the Kingswell Guarantee, and if the repair fails within the guarantee period, we come back at no charge. That includes the 365-Day Done Right Promise we hand over in writing on every job.
DIY or Call Us?
A homeowner can safely check a few things first: confirm the hinge screws are snug, look for a broken weatherstrip, and note where the door drags. But when an ECO door needs a slab swap or a multipoint lock rebuild, the margin for error gets small. Removing a full door panel means managing a 60 to 90 pound slab while keeping the reveal even on three sides. If the panel gets away from you, it takes out trim, drywall, or worse. Let an experienced installer handle anything beyond a screwdriver adjustment. Call (254) 322-3468 and we’ll give you a straight answer and a free estimate.
FAQs
An ECO entry door in Austin typically lasts 20 to 30 years, but the wear parts like weatherstripping, thresholds, and lock bodies need attention every 5 to 8 years. West-facing doors and those with direct afternoon sun fail faster due to UV and heat cycling. Call (254) 322-3468 if you’re seeing early wear, and we’ll assess it for free.
Yes, many ECO door issues are repairable, including threshold realignment, weatherstripping replacement, hinge bushing rebuilds, and lock gear swaps. Replacement only becomes necessary when the slab itself is warped, the glass seal has failed, or the frame is beyond shimming. Call (254) 322-3468 for an honest assessment of what your door actually needs.
A straightforward ECO door slab swap in Austin takes one visit, usually 2 to 4 hours from setup to final sweep. Pre-hung replacements with trim work run a full day. We give you a real arrival window before the appointment, not a four-hour guess.
Yes, our Austin trucks carry ECO-compatible thresholds, multipoint lock components, hinge kits, and weatherstripping for the most common series. We also stock parts for PGT, CGI, and CWS doors. If your part isn’t on board, we order it and schedule the return visit in writing.
If your ECO Window Systems door is dragging, leaking air, or hasn’t closed tight in months, call Westlight Windows Austin at (254) 322-3468. We’ll schedule a free estimate, put the price in writing before any work starts, and show up in the window we gave you. Owen and the crew have been measuring, framing, and finishing door jobs across Austin for years, from Travis Heights bungalows to newer builds near the Greenbelt, and we stand behind every install with the Kingswell Guarantee.
Written by Owen Satterfield, Owner, Westlight Windows Austin at Westlight Windows Austin, serving Austin and nearby areas.
Six Reasons Homeowners Choose Westlight Windows Austin
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.