New windows and doors improve comfort, cut energy bills and add long-term value to your home. Westlight Windows Austin pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
1. Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
2. Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
3. Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
CWS Door Installation: The Austin Owner’s Guide
If you have a CWS door in Austin that needs new installation work, the typical installed price runs $450 to $1,800 depending on the model, whether it’s a hinged or sliding unit, and what we find when we pull the old frame. Most CWS door installations are completed in a single day once the parts are in hand, and in many cases we can match components from our stocked inventory. We install CWS doors and door components as an independent service provider, not as a CWS affiliate, and we’ll tell you exactly what the job costs before anything gets started.
Most Austin homeowners discover a CWS door problem the same way: a slider that suddenly drags across the track, hinges that sag so the door scrape against the threshold, or a frame that’s gone soft from years of Texas heat and the occasional hard rain that comes with it. The good news is that CWS builds doors in common enough sizes that replacement parts and full door installation are usually straightforward.
Which CWS Models This Applies To
CWS manufactures hinged entry doors, sliding patio doors, and French-style doors across a range of series lines, and the installation path depends on which one you have. The quickest way to identify yours is to look for a small label or etching on the door edge or corner of the glass. CWS stamps the model series and the size there, and that information is enough for us to confirm compatibility before we order anything.
The thing that trips up a lot of Austin homeowners is assuming all CWS doors use the same hardware. They don’t. Sliding door rollers from the CWS 7000 series won’t fit the 5000 series track without modification, and hinge spacing on older CWS hinged patio doors is different from what you’ll find on units made in the last eight years. If you’re replacing an entire CWS door rather than a component, OEM is the safer route because the frame, sweep, and weatherstripping all line up the way CWS intended. For rollers, tracks, and hinge sets, we stock quality aftermarket equivalents that hold up at least as well in Central Texas heat, often for a third less than OEM pricing.
One more compatibility note specific to Austin: homes in hill country stretches like Westlake or around the Greenbelt get more direct sun and wind exposure than shaded bungalows in Hyde Park. We see faster weatherstripping breakdown on the most exposed sides of those homes, and the fix usually means a full door installation with new seals rather than spot replacement.
Signs Your CWS Door Installation Is Failing
- The door drags or catches when you open or close it. This usually means the rollers are worn flat or the door has settled out of square. In Austin’s clay-heavy soil, slab movement is common, and a door that was installed without enough frame anchoring shows it within a few years.
- You feel a draft around the edges before you even see one. CWS doors rely on compression weatherstripping that dries out and loses its spring in hot, dry summers. When the seal goes flat, the door starts leaking conditioned air.
- Water stains or soft wood on the interior side of the frame. This is the one we don’t like to see. It means water’s been getting past the threshold or the flashing for a while. In Austin, a single hard storm can reveal a poor install that had been fine for years.
- The door won’t latch or the strike plate is chewed up. Settlement and repeated use both contribute. If you’re lifting the handle or shoving the door to get it to catch, the frame’s out of alignment and shimming it back is a real repair, not a quick tighten.
- Visible cracks or gray streaking on the door frame or panel corners. UV exposure does this to older CWS frames. The material itself is usually still sound, but the surface has started to break down, and that’s the signal the door’s near the end of its service life.
Replacement Cost & What’s Included
Full CWS door installation in Austin runs on a range that depends on what we’re cutting into and what we’re pulling out. A straightforward hinged door replacement where the existing frame is sound typically lands between $450 and $1,200 installed. A slider with full frame replacement runs $1,100 to $1,800, more if we’re replacing a patio door opening that’s been leaking and the subfloor or studs need repair.
| Service | Typical Austin Installed Price |
|---|---|
| CWS hinged entry door, frame kept | $450 – $1,200 |
| CWS sliding patio door, full frame replacement | $1,100 – $1,800 |
| Roller or track replacement on existing CWS slider | $175 – $375 |
| Weatherstripping and threshold reseal | $125 – $300 |
Every price we give is a written price that goes to you before the first tool comes off the truck. That’s the Kingswell Way, and it means what it says: the number on the quote is the number on the invoice. The job includes removing the old door, disposing of it, installing the new one with the right flashing and sealant for our climate, and a written guarantee at completion. If something’s not right after we leave, we come back and make it right under our 365-Day Done Right Promise. No charge, no negotiating.
DIY or Call Us?
There are a few things a homeowner can safely do before calling anyone. You can look at the label on the door edge and write down the series and size. You can see if the rollers have adjustment screws on the bottom and try a quarter turn to level a dragging door. You can remove and look at a broken hinge to find the manufacturer stamp. Those steps take ten minutes and tell you what family of door you’re dealing with.
What you shouldn’t do is start pulling a CWS sliding door out of its frame or cutting into an exterior frame with a reciprocating saw. These doors are heavy, and older units particularly can have glass that’s sitting under tension from a frame that’s no longer true. If a panel binds and shatters, you’re dealing with a very different kind of day. Owen Satterfield and the crew have pulled enough old CWS frames out of Austin houses to know that what’s behind them is rarely what you expect. If the door is bearing on rotten wood or the opening wasn’t flashed right in 1998, you want that discovered by somebody who’s seen it before. Call us at (254) 322-3468 and we’ll take a look, in person, and give you a real price for the fix.
FAQs
Most CWS doors in Austin hold up 12 to 18 years before needing replacement, with sliding door rollers and weatherstripping being the first things to go around year 7 or 8, especially on west and south-facing walls where the sun doesn’t let up. Heavy use, unshaded exposure, and whether the original installation was done correctly are the biggest variables. If your CWS door is past the 15-year mark and showing any of the symptoms above, a new installation is usually cheaper in the long run than chasing one repair after another.
Yes, often we can. Worn rollers, failed seals, broken hinge sets, and misaligned strike plates are all repairable on CWS doors when the door itself and the frame are still sound. Repairs in Austin typically run $125 to $375. The point where replacement makes more sense is when the frame has rot, the door slab has warped, or the glass is failing. For an exact answer on your door, call (254) 322-3468 and we’ll tell you straight which way the math points, and the estimate’s free either way.
A typical CWS door replacement in Austin is done in one day, usually four to six hours on site from arrival to final cleanup. Full frame replacements and slider installs can run into a second day if we find water damage behind the frame that needs to be cut out and replaced before we set the new door, which happens often enough in older Austin construction that we plan for it. We’ll give you the arrival window before we come out, and we honor it.
We stock common CWS roller sets, hinge sets, weatherstripping, and threshold components in standard sizes, which means many Austin repairs can be handled in a single visit. For full door replacements, we order the specific CWS model to match your existing frame dimensions, and we also carry PGT, CGI, and ES Windows lines when it makes sense to look across the lineup. Whatever we quote you is what you’ll pay, and we put it in writing before we start.
Every CWS door installation and repair we do in Austin is covered by a written Kingswell Guarantee and the 365-Day Done Right Promise. The guarantee states what it covers and how long it lasts, and if the work isn’t right within that period, we return and correct it at no charge. You get a free second visit automatically if anything fails. We don’t make you chase us to honor it. That’s the point of putting it in writing in the first place.
Call us at (254) 322-3468 to set up a free estimate. We’ll come out to your home, look at the door, tell you what it needs, and hand you a written price you can hold us to. No pressure, no games, no number that changes when we show up.
Written by Owen Satterfield, Owner, Westlight Windows Austin at Westlight Windows Austin, serving Austin and nearby areas.
Six Reasons Homeowners Choose Westlight Windows Austin
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.