New windows and doors improve comfort, cut energy bills and add long-term value to your home. Westlight Windows Austin pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
1. Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
2. Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
3. Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
CGI Windows & Doors in Leander, TX | Westlight Windows Austin
We provide independent CGI window and door service throughout Leander, from seal repairs on a single fogged unit to full-home impact-rated replacements. The one thing that sets our CGI work here apart is pattern recognition: we’ve spent enough years on Leander jobsites to know which neighborhoods fight which failures, and we price the fix accordingly. If your CGI windows or doors need service, call (254) 322-3468 for a free estimate from a real person, any hour of the day.
Why Leander Residents Choose Us for CGI Service
Most window contractors can order a CGI window. Few actually understand what happens to one after seven or eight years of brutal Central Texas sun. Our techs work on CGI windows and doors daily across Leander’s master-planned communities like Crystal Falls and Travisso, which means we’ve seen exactly how these products hold up under heat, UV, hail, and the builder-grade installs common in this market. We know which CGI glazing packages fail first on west-facing walls, and which balance systems start complaining after a few hundred heat expansion cycles.
Owen Satterfield, our owner, grew up in the San Fernando Valley and learned the windows and doors trade through the building construction program at Los Angeles Trade-Technical College before setting up shop in Texas. His habit of taking time on the measuring end means less rework on the install end, and that’s held true across every Leander job we’ve finished. Measure it right the first time and the rest of the job takes care of itself. We’re an CGI sales & service provider for this region, and we answer the phone ourselves.
Common CGI Windows & Doors Problems We Solve in Leander
CGI builds a solid product, but Central Texas conditions find every weak point. Here are the failures we fix most often in Leander:
- Fogging between panes from premature seal failure. We see a concentrated run of this on CGI units installed during Leander’s early-2000s building boom, especially in Mason Hills. Triple-digit summers stress the seal around the insulated glass unit, moisture creeps in, and condensation shows up inside the glass. It’s repairable when the frame is sound.
- Sagging or misaligned sashes on older single-hung CGI windows. Heat expansion cycles are brutal on balance springs and pivot shoes. After enough 100-degree days, the sash starts dropping or binding, and the window either won’t stay up or won’t close square against the weatherstripping. The parts are replaceable, and we keep the common balance sizes in stock.
- UV-related fading and crumbling weatherstripping. Homes in Travisso with full western exposure take direct afternoon sun for hours. The weatherstripping on unprotected CGI windows dries out, shrinks, and quits sealing, which means drafty sashes and higher cooling bills. New OEM weatherstripping fixes the leak and tightens the window back up.
- Hail damage to insect screens and exterior frames. Severe thunderstorms roll through Leander hard enough to dimple aluminum frames and shred screen mesh. If the impact didn’t break the glass, we can usually repair or re-screen the frame instead of replacing the whole window. Impact-rated CGI glass handles this far better than standard builder glass.
- War worn impact hardware and multi-point locks on CGI doors. Leander homes with CGI swing doors or sliders get a workout from constant in-and-out traffic, and the multi-point locking mechanisms on some models lose their alignment. Door won’t latch cleanly? We re-align the hardware and replace worn locking strips.
CGI Service in Leander: What Local Conditions Mean for Your Equipment
Here’s the pattern we see that most generic window pages miss: Leander’s rapid expansion along the 183A toll corridor produced thousands of homes built between 2015 and 2020 where the original CGI windows went in without low-E glass. Those windows got baked through five or six brutal summers, and now an unusually high number show early seal failure, fog, and UV damage, far wider than what we find in neighboring Liberty Hill or Georgetown. In Mason Hills specifically, a community built during a rapid construction boom, we see windows with failing seals inside their first decade, evidenced by fogging between panes after only a few hot seasons. That means a homeowner buying a five-year-old house in Leander can inherit CGI windows that are already underperforming, not because CGI built them badly, but because the spec didn’t match the climate. The fix is usually an energy-efficient upgrade to low-E, impact-rated CGI glass, which is a meaningful improvement, not just a repair.
CGI Models & Products We Service in Leander
We service the full CGI lineup: the Estate Collection, Sentinel Series, Classic Series, and Targa Series, across both windows and doors. Wherever possible we use OEM seals, balances, and hardware to keep the fit and performance exact. For out-of-production CGI lines, we source proven aftermarket equivalents and only recommend full replacement when the frame or glass is genuinely compromised, not just fogged. We keep common parts and glass packages moving through our Leander service area weekly, which means shorter lead times on repair jobs for local homeowners.
CGI Service Pricing in Leander
What you’ll pay depends on what failed. A simple weatherstripping replacement on a CGI double hung usually runs $90–$180 installed. Replacing a failed balance system typically lands between $150–$260 per window, depending on the hardware. A full-glass replacement for a fogged CGI unit runs $450–$850 per opening. If you’re doing our Window Replacement in Leander for a full energy-efficient upgrade to low-E, impact-rated CGI across multiple windows, most Leander jobs fall between $1,200–$2,400 per window installed. Your written price comes before any work starts, and it does not change at the door. Call (254) 322-3468 to get exact numbers for your specific windows.
Serving Leander, TX - Our Local Coverage Area
We’re based in the Leander area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs — CGI Windows & Doors in Leander
Fogging means the seal on the insulated glass unit has failed, and moisture is now trapped between the panes. In Mason Hills, many original builder-installed CGI units went in without low-E glass, and Leander’s intense heat caused the seal to fail inside the first decade. The glass still holds heat poorly and the fog won’t clear on its own. We can replace the IG unit without replacing the frame. Call (254) 322-3468 and we’ll give you a written quote.
If the frame is square and the sash still operates, a glass replacement is almost always the right call, at roughly a third to half the cost of a new window. If the frame is hailstorm-damaged or the window was under-spec’d to begin with, meaning no low-E glass and a worn balance, our Window Installation in Leander for full replacement makes more sense. We’ll tell you straight which path your windows warrant, and the estimate is free.
Yes. Impact-rated CGI windows use laminated glass designed to take a severe impact without shattering, which matters when a spring storm puts golf-ball hail through standard panes. They also stiffen the opening structurally during high wind. For homes in Crystal Falls or Travisso with big west and north exposures, the upgrade is especially practical.
Going from non-low-E builder glass to low-E insulated CGI glass typically cuts solar heat gain through the window by 30 to 50 percent. In a Leander summer with weeks above 100 degrees, that’s a real difference in how hard your AC works. The exact savings depend on your home’s orientation and current window condition, and our free estimate will show the glass package options and installed pricing.
In most cases, yes. We match the frame color, grid pattern, and glass package against the surrounding CGI windows so the replacement doesn’t stand out. For out-of-production CGI lines, we’ll find the closest current equivalent and show you samples before we order. Call (254) 322-3468 and we’ll come measure.
Service Areas Near Leander
Our crew runs CGI service across the north Austin metro. If you’re in CGI service in Georgetown, we’re there weekly. Same for CGI service in Austin, Pflugerville, Buda, and Taylor. If you’re not sure whether we cover your street, just call and ask.
Book Your CGI Service in Leander Today
We’ll bring the sample books, the tape measure, and a written price before any work starts. Call (254) 322-3468 to schedule your free estimate, and a live person will pick up.
Written by Owen Satterfield, Owner at Westlight Windows Austin, serving Leander since 2009.
Six Reasons Homeowners Choose Westlight Windows Austin
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.